POLICIES

CONTACT

SPECIALS

BILL'S BLOG

Splinter II

40 meter transmitter and DC receiver on one board. Sidetone, VXO. Latest version (v.2) has same circuit, but with an improved T/R switch, antenna jack and real brass key.  

CLICK HERE FOR MORE

Sawdust

Woodchip

Toothpick

Matchstick

CPO

End Fed Antenna

OCFD Antenna

Wood Stain

Timber T/R

QLF-Foot Switch


40 meter regen receiver. Amazing performance. Fixed regeneration, attenuator. Will work as CPO. Provision for mute, sidetone and T/R. Adjustable tuning range from 25 to100 KHz.  

CLICK HERE FOR MORE

40 meter universal transmitter. Half watt output. Has sidetone, 3 position VXO, mute and works with key or keyer. Perfect mate for Sawdust or vintage receivers. Use with our  T/R switch for antenna switch.  

CLICK HERE FOR MORE

The Toothpick is an effective audio filter for improving CW reception.  Has a variable peak frequency control and a built-in audio amplifier that will drive a speaker. Works with most receivers.  

CLICK HERE FOR MORE

The Matchstick is an antenna matching device designed for 40 meters. Tunes hi or low impeadance using a "L" network and a visual SWR indicator.  Handles up to 10 watts.    

CLICK HERE FOR MORE

OUR PRODUCTS

Our Code Practice Oscillator features a pure sine wave tone from a twin-Tee oscillator circuit followed by an audio amplifier stage driving a built-in speaker.  Built in key also!    

CLICK HERE FOR MORE

The Wood Stain is a QRP dummy load for up to 10 watts.  Also contains a built-in R.F. probe! Just connect your Volt-ohm meter to read your R.F. Power Output.  Nifty!  

CLICK HERE FOR MORE

Our End Fed Random Wire antenna has a unique space saving design and can be mounted in several configurations. 80 - 10 meters with a good antenna tuner and proper wire and coax length.     

CLICK HERE FOR MORE

Designed to work with our Woodchip and Sawdust. Provides antenna and mute switching for receiver and transmitter operation. Will work with most QRP transmitters and vintage tube receivers.  

CLICK HERE FOR MORE                                                                       

Simple but effective foot switch for operating our T/R switch with semi-QSK speed...easier than flipping a slide or toggle switch. Worked great for me when I was a novice in the sixties!  


Our unique  OCFD antenna is pre-assembled. Also offered as a partial kit. Add your own wire,insulators and coax to build your own Off Center Fed Dipole or Delta Loop antenna.

CLICK HERE FOR MORE

More to come!

Your Host...Terry Termite

QRP Kits fthat are easy to buils and fun to use.  

Breadboard Radio

QRP Kits

QRP Kits that are easy to use and fun to use.

Welcome

Two new kits are now available!  The Sawbuck D.C. Receiver and an improved version of our Code Practice Oscillator. Our new Morse Code Key and QLF foot switch will be available soon.  The 60 and 40 meter Woodpecker transceivers are being field tested now and will be available as soon as the assembly manuals are written.  

All of our kits are complete with all parts, top quality American made circuit boards and personal service.


Sawbuck DC Receiver

60 meter Woodpecker

40 meter Woodpecker

Woody Straight Key Kit


60 meter CW transceiver for 5332KHz.  Sidetone, QSK T/R switching RIT, Audio filter and more. Half watt plus output.  I have made several 300 to 700 mile contacts!

40 meter DC receiver designed to work with the Woodchip. Mute, sidetone, audio filter and more.


CLICK HERE FOR MORE

Basically a 40 meter version Woodpecker with two panel selected crystal frequencies

A neat little key made from all wooden parts except for the switch and cable with attached 1/8 in. phone plug.

New Version!!!